BSCB is a low-cost, highly expandable carrier board for BASIC Stamp Microcontroller Modules (BS2) and other Third-Party Stamp compatible modules. Supported BS2 modules: BS2 BS2p BS2e BS2pe BS2sx BS2px All Supported Modules

BSCB board allows interfacing BASIC Stamp to a wide variety of peripheral boards such as:

• Prototyping board (PROTO-1)
• Training Board (TB-1)
• 4-digit 7-segment LED display board (LED-1)
• 12-bit Analog-To-Digital Converter Board (DAQ-2543)
• Digital Input/Output Expander Board (DIO-1)
• Real time clock + 128 MB flash card board (MMC/RTC)
• Terminal board (Terminal-1)
• Reed relay board with 4 relays (Relay-4 reed)
• Power relay board with 2 or 4 relay (Relay-2; Relay-4)
• Stepper motor driver board (Motor-1)

BSCB Common Features:

• 24-pin DIP socket for a BASIC Stamp Module ((BASIC Stamp Module itself is not included))
• RS232 Serial Port connector for applications or for In-circuit Programming of the BASIC Stamp through the serial port. ( Serial cable included )
• Single row and dual row 14-pin LCD connectors ( with contrast adjustment for LCD )
• 20-pin Expansion connector for plugging peripheral boards.
• 6-12 VDC operation ( Adapter included )
• On-board 5 Volt regulator

BSCB-1 Specifics:

• Prototyping area for adding custom circuits

BSCB-2 Specifics:

• Secondary Microcontroller (16F818) that adds I/O ports, analog inputs and EEPROM
• 10-pin matrix keypad connector ( also usable as generic I/O ) 10-pin connector also usable for analog inputs with 5V power and 4.096V reference
• 128 byte EEPROM accessable from BASIC Stamp via the I2C bus
• 4-channel, 10-bit ADC accessable from BASIC Stamp via the I2C bus
• 10-pin connector for analog inputs with 5V supply and 4.096V Reference Voltage outputs.
• Socket for additional EEPROM ( accepts up to 128 Kbytes of EEPROM )

BSCB-1 Manual BSCB-2 Manual Peripherals Software Supported Modules BSCB Boards Comparison Chart   BSCB-1 $29 BSCB-2 $39	MicroTRAK/BSP Complete - Training Kit