PICD-430 In-Circuit Debugger
JTAG in-circuit debugger provides in-system flash programming, real-time run and single step program execution, breakpoints, and real-time tracing (tracing for some derivatives only)..
Features:
Supports entire MSP430 family and future derivatives
IDE shell with a project manager and MCA-430 macro assembler available at no charge
Integrates selected TP compilers (MCC-430 from MicroCOSM-ST and EW430 from IAR Systems) and provides project management for these tools.
TI MSP430 Flash Emulation Tool (MSP-FET430) can be hooked up to the system and featured by a C compiler and enhanced emulation & tracing functions
PDS-430 command set software simulator for all popular C compilers
High-level steps for C programs and low-level steps for assembly code
Up to 8 unconditional breakpoints at the address, or the range of addresses, in code memory
Up to 8 complex breakpoints / triggers on access to data memory - read, write or read/write, cycle type, internal bus event, register writes, etc.
Set triggers can be programmed to get a complex (AND, OR, and Sequential) condition for the program break or trace control
Easy-to-use graphical presentation for setting complex breakpoints/triggers
Enables to examine and modify internal resources of the target MSP430 MCU when execution is stopped
For some MSP430 derivatives internal clock can be enabled after the break so the target MCU will continue generate tact signals for an external LCD or other peripherals
Trace buffer records 40-bit frames displaying real-time signals on the internal MSP430 bus: 16 lines of address, 16 lines of data and 8 controls
Depth of the trace buffer is defined by a particular MSP430 type (8 frames min)
Filtering and searching trace frames
Several tracing modes: forward (start on trigger, stop on the buffer overflow), reverse (start on command, stop on trigger) and dynamical (start on one trigger, stop on another)
Can be equipped with a target board (or target boards) of your choice
Interfaces to a PC via a high-speed USB port
Palm size tool
Works under control of Windows 9x/ME/2000/NT/XP
Prices:
Products
Chips supported, Features, Comments
Price
Phyton software tools for MSP430
MCC-430
Includes a MCC-430 C compiler, assembler, MSP430 core simulator, driver for PICD-430 and IDE. The IDE allows to integrate the IAR C compiler for MSP430.
$295
Phyton hardware tools for MSP430
PICD-430
JTAG emulator and programmer for MSP430 microcontrollers. The software package includes a 30-days time-limited, yet fully capable MCC-430 C compiler, MCA-430 assembler, PDS-430 MSP430 core simulator, driver for PICD-430 and IDE. The IDE allows to integr.
$200
What's Hot? OLED Development Kit Easy project development using Organic LED ( OLED ) displays available now MINI-MAX/AVR-C highly expandable micro-controller system which is based on the ATMEL ATMEGA2560-16 single-chip Flash micro-controller available now
