 |
CBL-I2C-MO
CBL-I2C-MO is a 4-wire generic I2C cable that is used for connecting the Matrix Orbital line of serial LCD and VFD displays to
micro-controller systems. The advantage of the I2C bus is that using only 2 wires, multiple peripheral devices can
be controlled with a micro-controller. Several Matrix Orbital displays can be connected to a micro-controller system
using multiple CBL-I2C-MO cables.
|
 |
| |
CBL-I2C-MM-MO
CBL-I2C-MM-MO is a 4-wire I2C cable that is used for connecting the Matrix Orbital line of serial LCD and VFD displays to MINI-MAX and PRO-MAX micro-controller boards using the BiPOM Expansion Bus.
|
| |
|
|
 |
CBL-PWR-5V-MO: This modified power cable will allow a computer power supply to power any standard 5V display. Not to be used on USB units.
|
| |
|
|
 |
CBL-PWR-12V-MO: This modified power cable will allow a computer power supply to power any wide voltage or VPT display. Not to be used on USB or Standard Voltage (5V) units
|
| |
|
|
 |
POWER CABLE STANDARD: This unmodified power cable will allow a computer power supply to power a display.
|
| |
|
|
 |
Power Cable USB: This 3ft modified USB power cable will allow a computer USB Port to power any standard 5V display.
Not to be used on USB, -V or -VPT units.
The maximum power draw cannot exceed 250mA.
|
| |
|
|
 |
3 pin EC: Fan out of reach? This 30cm (12 inch) 3 pin extension cable will help you connect those hard to reach fans to your display.
|
| |
|
|
 |
3 Pin Y Splitter: Not using the fan headers to their full advantage? This Y splitter will allow multiple fans to be connected to one fan header.
Power consumption of cannot exceed 1000mA (12 Watts) in total per fan header.
Only one RPM per header can be read.
Multiple Y splitters can be connected together.
|
| |
|
|
 |
4-3 CVR: This cable will allow any MX or USB series display to control your fan 4 pin fans, for maximum performance and minimal noise. Just connect the one end to the display, and the other to your fan and you're done, this adapter cable also includes RPM sensing pin, so you can view the RPM's of the fan on your Matrix Orbital display.
|
| |
|
|
 |
Temperature Probe: This highly accurate 2.5ft temperature probe is a great addition to create a digital bay bus. The probe may be attached to your RAM, video card or anything else in your system for accurate and up to date system temperatures.
|
| |
|
|
 |
Breadboard Cable: This development cable has been created to get your project off the ground faster than ever before. It allows a display to be connected to a bread board for fast and easy development.
|
| |
|
|
 |
Breadboard Parallel Development Cable: This development cable has been created to get your project off the ground faster than ever before. It allows a display to be connected to a bread board for fast and easy development.
|
| |
|
|
 |
Communication and Power Cable: Straight through serial communication and 5V power cable. This cable can be used with any MOS or LK/VK/PK display to power and communicate through the 4pin SIP header.
Cable Type: Serial and Power
Length: 63.5cm (25inches)
Connector A: 4pin SIP male and DB-9 female
Connector B: 4pin SIP female
|
| |
|
|
 |
SERIAL CABLE -4BR: -4BR serial cable for the GLK12232-25-WBL and GLK12232-25-SM. Included with the BLK202A-4BR series.
|
| |
|
|
 |
SERIAL CABLE 1FT: Straight through serial communication cable. This cable can be used with any display that features a DB9 header, such as the LK/VK/PK series.
Cable Type: Serial
Length: 30cm (12inches)
Connector A: DB-9 male
Connector B: DB-9 female
|
| |
|
|
 |
SERIAL CABLE 4FT: Straight through serial communication cable. This cable can be used with any display that features a DB9 header, such as the LK/VK/PK series.
Cable Type: Serial
Length: 120cm (48 inches)
Connector A: DB-9 male
Connector B: DB-9 female
|
| |
|
|
 |
USB CABLE 3FT: Standard A to B USB communication cable. This cable can be used with any display that features a USB header, such as the any of the -USB series.
Cable Type: USB
Length: 91cm (36inches)
Connector A: USB A
Connector B: USB B
|
| |
|
|
 |
USB CABLE INTERNAL 2FT: Internal USB communication cable. This cable can be used with any display that features a USB header, such as the any of the -USB series and connect to a 4/5 pin internal usb header.
Cable Type: USB
Length: 61cm (24inches)
Connector A: 5 pin header
Connector B: 4 pin header
|
| |
|
