MINI-MAX/ARM-C
ARM7 based µController board
USB Peripheral Boards
Find By Type:
- All
- USB Memory
- USB Data Acquisition (D/A, A/D, Sensors)
- USB Communications
- USB Control
- USB batteries & power supplies
- Breakout Boards
DLP-TEMP-G
DLP-TEMP-G is a microcontroller based 3-channel data-acquisition system preprogrammed with firmware for digital I/O or reading digital temperature-sensing devices. The DLP-TEMP-G board is equipped with a Type A male USB connector for direct connection to a USB port. No cable is required unless the board is to be located away from the PC, in which case a user supplied USB A-A (male-female) extension cable can be used.
Details
DLP-IO8-G
DLP-IO8 Data Acquisition Module is a low-cost, easy-to-use data acquisition system for measuring voltages, controlling and monitoring processes, and acquiring temperature data. Each of the 8 available channels can be configured for any of the digital, analog, or temperature modes via single-byte commands. All operational power is taken from the host PC via the USB port.
Details
DLP-UTH8
DLP-UTH8 is a low-cost, easy-to-use active hub used for connecting multiple temperature and humidity sensors to one PC featuring 4th generation USB silicon from FTDI. All operational power is taken from the host PC via the USB port. The temperature and humidity sensor modules (shown below) connect to the DLP-UTH8 using standard CAT5 ethernet cable.
Details
