Training Board allows performing various
experiments with most microcontrollers. TB-1 has programmable
traffic lights, 4-channel, 8-bit analog inputs,
buzzer, switch inputs, and counter/timer inputs to
test the interrupts.
DAQ-2543-DA1 is an ADC/DAC peripheral board with TLC2543, 11-channel, 12-bit Analog-To-Digital Converter from Texas Instruments and a LTC1663, 10-bit Digital/Analog Converter from Linear Technology.
All the channels are available on terminal blocks.
DAQ-127 and DAQ-128 are 8-channel, 12-bit, Analog Input and 1 channel, 10-bit Analog Output peripheral boards. DAQ-127 has +/- 10 Volt input range. DAQ-128 has +/- 4 Volt input range.
4 channel thermocouple board with cold-junction
compensation and amplification for any combination of type E,J,K,R,S,T
thermocouples. Use with DAQ-2543 or DAQ-128 boards.
8-channel normal speed and 1-channel high speed opto-isolated input board. Ideal for high voltage detection, isolated input detection, frequency and period measurements.
DIO-1 is an I/O expander board with 8 open/collector outputs ( each capable of 400mA ) and 12 TTL/CMOS inputs/outputs. A PIC16C62 micro-controller on this board acts as a I2C 2-wire slave device to control inputs and outputs. DIO-1 can also be used as a standalone PIC micro-controller board.
What's Hot? OLED Development Kit Easy project development using Organic LED ( OLED ) displays available now MINI-MAX/AVR-C highly expandable micro-controller system which is based on the ATMEL ATMEGA2560-16 single-chip Flash micro-controller available now
