JEM-ARM Emulator and programmer for ARM
JTAG emulator for ARM microcontrollers; supports a variety of ARM7 and ARM9 devices from Atmel, NXP, ST_Microelectronics, Luminary, Oki, Freescale, TI, AD and other vendors; requires any CM-ARM software to work with.
Features:
PC hosted via a USB port
Supports debugging and programming for ARM7- and ARM9-based devices from Atmel, NXP/Philips, STMicroelectronics, Texas Instruments, Oki, Analog Devices, and others
Automatically programs flash memory when loads a program for debugging
Smart programming algorithm reduces flash memory writing time and prevents the MCU memory against premature wearing out
Supports operations with external program and data memory devices
Supports real-time and single steps program execution
Enables two hardware breakpoints
Enables access to all target microcontroller resources when halted at a breakpoint
JTAG clock frequency up to 8 MHz
Automatically adjusts a built-in clock generator to match the RTCK frequency, if cannot detect the RTCK signal sets the Fclk to maximum (for ARM7TDMI-S core only)
Software tracer records and displays preprogrammed set of parameters when emulation is halted on a breakpoint or after a step
Requires no external power adapter - gets power from a standard USB PC port
Featured with an embedded regulator powering the target with a programmable voltage - 1V to 5V/350 mA
The JTAG logical I/O lines tolerate target input/output signals in the 1 to 5.5V range
Conveniently controllable from the Phyton CodeMaster-ARM integrated development environment
The software set includes a C-like script language for hardware testing and device programming
Dimensions - 4"x2-1/2"x1" (100x70x25 mm)
Prices:
Products
Chips supported, Features, Comments
Price
Phyton hardware tools for ARM
JEM-ARM
JTAG emulator for ARM microcontrollers.
$250
Phyton software tools for ARM
CM-ARM/D
Includes a time-limited, yet fully capable CMC-ARM C compiler, GNU GCC, assembler, simulator and driver for JEM.
$495
CM-ARM/C
Includes a fully capable CMC-ARM C compiler, assembler, and simulator.
$995
CM-ARM/CD
Includes a CMC-ARM C compiler, GNU GCC compiler, assembler, simulator and driver for JEM .
$1490
CP-ISP
Additional software shell for use JEM-ARM specifically for device programming.
$100
Target (header) boards
TB2-LPC210X
Target (header) board with NXP LPC2106 device.
$60
TB2-LPC211X
Target (header) board with NXP LPC2194 device.
$60
TB2-LPC213X
Target (header) board with NXP LPC2138 device.
$60
Projects
What's Hot? OLED Development Kit Easy project development using Organic LED ( OLED ) displays available now MINI-MAX/AVR-C highly expandable micro-controller system which is based on the ATMEL ATMEGA2560-16 single-chip Flash micro-controller available now
