CART
  • Cart is empty.

    ItemQuantityPrice

    Total: $0

VDC2450


Roboteq's VDC2450 controller is designed to convert commands received from a RC radio, Analog Joystick, wireless modem, or microcomputer into high voltage and high current output for driving one or two DC motors. Designed for maximal ease-of-use, it is delivered with all necessary cables and hardware and is ready to use in minutes.

The controller's two channels can either be operated independently or mixed to set the direction and rotation of a vehicle by coordinating the motion on each side of the vehicle. The motors may be operated in open or closed loop speed mode. Using low-cost position sensors, they may also be set to operate as heavy-duty position servos. Numerous safety features are incorporated into the controller to ensure reliable and safe operation.

The controller's operation can be extensively automated and customized using Basic Language scripts. The controller can be reprogrammed in the field with the latest features by downloading new operating software from Roboteq.

VDC2450 - DC Motor Controller. Brushed, 2x150A, 50V, Serial, RC, Analog in
Part No. Description Price Stock
VDC2450 DC Motor Controller. Brushed, 2x150A, 50V, Serial, RC, Analog in $545
∗ Standard lead time is 1 week

Features


  • Operating Voltage: 10V to 50V DC
  • Number of Channels: 2
  • Max Current: 1min - 150A, 3 min - 100A, 1h - 80A
  • Surge Current > 250A
  • ON Resistance: 3 mOhm
  • Synchronous Rectification: Yes - Allows regenerative braking
  • Current Limiting: By automatic power output reduction above user preset level
  • Temperature protection: Automated power reduction starting at 70o C heat sink temperature
  • Voltage protection: Output shut off below 9V and above 50V - user adjustable
  • Short Circuit protection
  • Power Wiring: AWG8 Cables
  • R/C Inputs: 1.0ms - 1.5ms center - 2ms. Adjustable
  • Serial Interface: RS232. 115200 bauds
  • Analog Interface: 0V - 2.5V center - 5V. Adjustable
  • Input Corrections: Ch1 & Ch2 mixing for tank steering. Programmable deadband. 6 Exponent & Logarithmic command curves.
  • Analog Inputs: up to 4 inputs, 10-bit resolution
  • Digital Outputs: 2 outputs, 24V 1A max
  • Digital Inputs: up to 6 general purpose inputs
  • Pulse Inputs: up to 5 Pulse Length, Duty Cycle or Frequency inputs
  • 5V Supply Output: 100mA max for Radio or other devices
  • Open Loop Speed: Forward & Reverse Speed Control. Separate or Mixed
  • Closed Loop Speed: Use Tachometer on analog inputs & PID
  • Position Mode: Use Potentiometer on analog inputs & PID
  • Controller Configuration: Jumper-less using PC utility
  • Max Program Size: ~1500 lines of Basic-language code, 1000 user variables
  • Execution Speed: Higher than 50,000 lines per sec
  • Operating Temperature: -40 to +85oC heat sink temperature
  • Enclosure : Aluminium extrusion
  • Heatsink Cooling
  • Controller size: 5.5" (140mm) wide x 1.6" (40mm) tall x 9" (228mm) long including mounting brackets
  • Cables: 10" (25cm) RC cable to Radio
  • Weight: 3lbs (1.350kg)