CART
  • Cart is empty.

    ItemQuantityPrice

    Total: $0

Industrial Wireless Accelerometer - Impact Detection


Monnit's industrial wireless accelerometer - Impact Detection sensor activates when g-forces are exceeded by a user defined threshold - up to 8 g-force. The user can key in the desired threshold for the g-force trigger. This sensor has two operation modes that can be also selected by the user: High Performance and Low Power. High Performance has an output data rate of 800 Hz with the High Pass Filter cutoff at 16 Hz while the Low Power has an output data rate of 12.5 Hz with the High Pass Filter cutoff at 0.25 Hz. Industrial sensors come in a NEMA 4X rated weatherproof / dustproof enclosure and features an industrial single 3.0 Volt AA battery for long life.

Industrial Wireless Accelerometer - Impact Detection - Single 3.0V Tadiran Battery Powered	Industrial Wireless Accelerometer - Impact Detection,900MHz
Part No. Description Price Stock
MNS-8-AC-IN-P3 Single 3.0V Tadiran Battery Powered Industrial Wireless Accelerometer - Impact Detection,868MHz $159
MNS-9-AC-IN-P3 Single 3.0V Tadiran Battery Powered Industrial Wireless Accelerometer - Impact Detection,900MHz $159
MNS-4-AC-IN-P3 Single 3.0V Tadiran Battery Powered Industrial Wireless Accelerometer - Impact Detection,433MHz $169
∗ Standard lead time is 2 weeks

These accelerometers do not "stream" continuous data. Please reference the data sheet for further information.

Packing List


  • Industrial Sensor
  • High Gain Antenna
  • Single 3V AA Battery (pre-installed inside sealed sensor housing)

Features


  • 900/868/433 MHz Operating Frequency
  • Replaceable, Single AA, 2500mAH, 3.6V Battery
  • -40° to 85°C (-40° to 185°F)
  • 300 - 350 ft. non-line-of-sight device range*
  • Up to 5 Year Battery Life.**
  • IP66 NEMA 4X, CE rated, sealed, weatherproof enclosure.
  • FCC and IC certified.

* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.