CART
  • Cart is empty.

    ItemQuantityPrice

    Total: $0

Wi-Fi Voltage Meter - 0-1.2 VDC with High Gain Antenna


The Monnit Wi-Fi voltage meter is capable of measuring the voltage off another device, battery, or sensor, up to 1.2 volts DC by connecting the leads on the sensor to the positive and ground terminals of the device being measured. Examples of interfacing devices include, but are not limited to: Strain Gauge, Pressure Transducer, RTD, Thermistor, or Thermocouple, Piezo Electric sensors, Photoresistor, Industrial Accelerometer, any kind of variable resistor, any kind of sensor that outputs a voltage, etc. If the device being measured is passive, the user must supply their own excitation voltage, as the Monnit Wi-Fi voltage meter is really just a "voltage observer". Cannot be used for AC voltage measurement.
This version of the Wi-Fi sensor uses a detachable high gain antenna to provide a 20-30% increase in range over the standard Wi-Fi sensor. The sensor features an integrated 802.11 b/g radio transmitter that can be easily programmed to work with any existing Wi-Fi network.

Wi-Fi Voltage Meter - 0-1.2 VDC with High Gain Antenna - Wi-Fi Voltage Meter - 0-1.2 VDC with High Gain Antenna, No Gateway Needed
Part No. Description Price Stock
MNS-2-AN-WF-LD-A2 Wi-Fi Voltage Meter - 0-1.2 VDC with High Gain Antenna, No Gateway Needed $159
∗ Standard lead time is 2 weeks

Monnit Wi-Fi sensors can be easily programmed with Wi-Fi network security via a low cost USB programming cable, available here, and the free MoWi Setup Utility for Windows®PC's, keeping the user's Wi-Fi network secure. User defined transmission intervals (heartbeats) and sensor threshold settings ensure that sensor data is received when needed, based on the application. All sensor data is stored securely in the iMonnit Online Sensor Monitoring software and is viewable from any web enabled device. Email and SMS text messages can be configured through the online system to alert the user immediately when a defined parameter has been met or exceeded.
WARNING: Use caution when interfacing to the Monnit Wireless Voltage Meter. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 3.6V WILL DAMAGE the electronics of the Monnit Wireless Sensor. BiPOM is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.

In order to program the sensor to connect to your wif-fi network, you will need a Wi-Fi programming cable and the free MoWi setup utility. The MoWi setup utility is currently available for Windows® PC's only. Mac and Linux are not currently supported!

Packing List


  • Mowi Wi-Fi Sensor
  • Detachable High Gain Antenna
  • 2 - AA Batteries

Features


  • 802.11 b/g (2.412 - 2.484 GHz)
  • Up to 250 ft. (Typical to standard Wi-Fi devices)
  • Open, WEP, WPA, WPA2 Security Standards
  • High gain, RPSMA antenna provides 20-30% increase in range.
  • Interfaces with other devices up to 1.2 VDC

* Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat), sensor type, Wi-Fi security type, distance from Wi-Fi router and other variables.