General > GadgetPC

Pinout for the serial port?

(1/2) > >>

franklin97355:
I have two questions.
1. where can I find the pinout for the serial port on the GadgetPC?
 and
2. Is it 3.3v or 5v levels?

franklin97355:
Vitaliy responded with this:
3.3v (out)
GND
RXD(3.3v in)
TXD(3.3v out)
GND
Not Connected
GND
GND
This is with the four USB ports facing to the right.
Thanks Vitaliy

vitaliy:
http://www.bipom.com/support/gadgetpc/uart.jpg

vitaliy:
The simplest way to get access to a serial console is to use a  BRD-RS232-TTL-1  peripheral board .
http://www.bipom.com/products/us/851715.html
The board will be powered from the GadgetPC if the J8 jumper is closed.

meetseo:
Hi,

This is really a very nice info. Thanks & keep us updated.

Regards

Navigation

[0] Message Index

[#] Next page