BiPOM Forum
General => GadgetPC => Topic started by: franklin97355 on November 21, 2009, 12:05:25 pm
-
I have two questions.
1. where can I find the pinout for the serial port on the GadgetPC?
and
2. Is it 3.3v or 5v levels?
-
Vitaliy responded with this:
3.3v (out)
GND
RXD(3.3v in)
TXD(3.3v out)
GND
Not Connected
GND
GND
This is with the four USB ports facing to the right.
Thanks Vitaliy
-
http://www.bipom.com/support/gadgetpc/uart.jpg
(http://www.bipom.com/support/gadgetpc/uart.jpg)
-
The simplest way to get access to a serial console is to use a BRD-RS232-TTL-1 peripheral board .
http://www.bipom.com/products/us/851715.html
The board will be powered from the GadgetPC if the J8 jumper is closed.
(http://www.bipom.com/support/gadgetpc/serial_console.jpg)
-
Hi,
This is really a very nice info. Thanks & keep us updated.
Regards
-
I want to know which any USB Flash Drive i can connect with GadgetPC ?
-
http://www.bipom.com/documents/boards/gadgetpc/GadgetPC%20Supported%20Hardware.pdf