Messages

61

GadgetPC / Re: No power to USB ports???

« on: January 22, 2010, 01:49:13 am »

Please explain details of your setup.
How did you connect the RS232 converter board to GadgetPC ?
Maybe the best thing is to take pictures and email to tech@bipom.com.  Then I will be able to review them
to see what is wrong

62

GadgetPC / Re: No power to USB ports???

« on: January 11, 2010, 03:04:43 am »

no, I don\'t have  the schematics

63

GadgetPC / Re: No power to USB ports???

« on: January 10, 2010, 07:22:25 am »

what is baudrate ?

64

GadgetPC / Re: No power to USB ports???

« on: January 09, 2010, 03:27:08 am »

Please look at
http://www.bipom.com/cgi-bin/yabb2/YaBB.pl?num=1258826725

It shows all the necessary jumpers, connections, etc.

65

GadgetPC / Re: No power to USB ports???

« on: January 08, 2010, 04:03:03 am »

You need the converter only to get started.
Because you will see all log messages.
Theoretically, if you are enough experienced you can manage that task ( Linux configuration, administration) without  a serial console.
For example, using telnet,putty, etc. over network connection.
To get started at the 1st time I recommend to use the converter. This is the simplest way to get access to Linux console even if the system is not configured correct.

66

GadgetPC / Re: No power to USB ports???

« on: January 07, 2010, 03:13:48 am »

yes, the converter simplifies many things

67

GadgetPC / Re: No power to USB ports???

« on: January 06, 2010, 02:57:39 am »

SAM-BA will work only over USB.
We provide UART0 on the 8-pin connector.

> I need to install Debian and use a UVC camera on my project.

Please move incrementally. Try to start with ARM9 Linux release. It is much simpler.
If everything works you can try Debian.

In any case, the 1st step is  to see Loader messages on Hyperterminal window

68

GadgetPC / Re: No power to USB ports???

« on: January 05, 2010, 01:31:52 am »

You don\'t need SAM-BA at all.
Just run a hyperterminal ( 115200 bps, 8 data bits, no parity, 1 stop bit, without hardware control)

69

GadgetPC / Re: No power to USB ports???

« on: January 04, 2010, 12:54:29 pm »

Please keep me posted if you are still having any problems

70

GadgetPC / Re: No power to USB ports???

« on: January 02, 2010, 05:02:49 am »

1. GadgetPC has 2 LEDs ( RED and GREEN).
Are they switched ON when you power the GPC  board through USB device port ?

2. Does your Flash drive have  a built-in LED/indicator ?
Can you see any activity ?

3. WUA-1340 has a built-in LED. Can you see any activity?

Btw, the simplest way to get started is to connect
a  BRD-RS232-TTL-1  peripheral board .
http://www.bipom.com/products/us/851715.html

Then you will be able to see all messages to identify the problem ( Loader and Linux boot messages)

Please look at this topic as well
http://www.bipom.com/cgi-bin/yabb2/YaBB.pl?num=1258826725

71

GadgetPC / Re: GadgetPC release

« on: December 16, 2009, 02:22:56 am »

2Stephen
as the 1st step please connect an RS232 adapter to the board.


Then we can look at Linux log to detect the problem.

About wireless connection.
Note, your wireless network has to use WEP

72

GadgetPC / Re: GadgetPC release

« on: December 15, 2009, 02:47:50 am »

Look at this http://www.bipom.com/cgi-bin/yabb2/YaBB.pl?num=1258826725

73

GadgetPC / Re: Webcam problem

« on: December 11, 2009, 10:54:56 am »

please read
http://www.bipom.com/documents/boards/gadgetpc/GadgetPC_UVC_Web_Camera_Installation_Guide.pdf

74

GadgetPC / Re: Writing to the flash drive

« on: December 11, 2009, 10:35:45 am »

Please read
http://www.bipom.com/documents/boards/gadgetpc/GadgetPC%20DataFlash%20JFFS2.pdf

75

ARM Development Tools / Re: download problem MINI-MAX/ARM-E

« on: August 12, 2007, 02:26:45 am »

Please visit
http://www.bipom.com/support/armdevfaq.shtm

http://www.bipom.com/mmarm_faq.shtm
http://www.bipom.com/armdevfaq.shtm