Author Topic: GadgetPC release  (Read 9217 times)

Administrator

  • YaBB Administrator
  • Newbie
  • *****
  • Posts: 0
    • View Profile
    • BiPOM Forum
GadgetPC release
« on: March 02, 2009, 12:26:04 am »
GadgetPC is now released.  :)

It comes with pre-installed Linux and supports many standard applications such as Web Server, FTP Server, Telnet Server, OpenSSH, Firewall, Router, Network Time Server, Email, Fax Server and many others.

It is a low-cost, low-power replacement for PC\'s in many applications.
The Administrator.

kpel

  • Guest
Re: GadgetPC release
« Reply #1 on: May 28, 2009, 04:08:17 pm »
Very good! I also liked the idea to offer a development kit. Can\'t wait to receive mine :-)

By the way, is the source code for the Linux kernel and the USB peripherals (e.g. webcam) available online? Thanks.

--
Kostas

ozwizard

  • Guest
Re: GadgetPC release
« Reply #2 on: June 01, 2009, 10:53:44 pm »
All software is open source, including drivers.

We support few different webcams, a webcam server and a program that detects motion and starts recording.

Oz

franklin97355

  • Guest
Re: GadgetPC release
« Reply #3 on: November 25, 2009, 02:33:29 pm »
Got mine but don\'t have an ethernet device yet (didn\'t realize how few devices were supported) and am not able to connect with the console port. Are there documents on connecting to the port? I have not found anything but mention that it can be done.

vitaliy

  • Full Member
  • ***
  • Posts: 30
    • View Profile
Re: GadgetPC release
« Reply #4 on: December 15, 2009, 02:47:50 am »

franklin97355

  • Guest
Re: GadgetPC release
« Reply #5 on: December 15, 2009, 09:38:30 pm »
Well, so far I have not been able to connect to the device. The best I have so far is a light on the board when I connect it to USB port but no connection through USB Serial or wireless. I assigned a static IP but can\'t connect using a web browser or FTP. Guess I\'ll keep reading until this forum heats up a bit.

vitaliy

  • Full Member
  • ***
  • Posts: 30
    • View Profile
Re: GadgetPC release
« Reply #6 on: December 16, 2009, 02:22:56 am »
2Stephen
as the 1st step please connect an RS232 adapter to the board.


Then we can look at Linux log to detect the problem.

About wireless connection.
Note, your wireless network has to use WEP