Featured Product
|
|
 |
 |
|
| Peripheral Boards |
 |
|
| DIO-1 |
 |
|
|
DIO-1 is an I/O expander board with 8 open/collector outputs ( each capable of 400mA ) and 12 TTL/CMOS inputs/outputs. A PIC16C62 micro-controller on this board acts as a I2C 2-wire slave device to control inputs and outputs. DIO-1 can also be used as a standalone PIC micro-controller board |
|
| |
| RELAY-4REED |
 |
|
|
Relay peripheral board with 4 reed relays. Normally Open Contacts |
|
| |
| RELAY-4 |
 |
|
|
Relay peripheral board with 4 power relays |
|
| |
| MOTOR-2 |
 |
|
|
MOTOR-2 controls simultaneously 2 bipolar or unipolar stepping motors with phase currents up to 2.5A. MOTOR-2 can be used as a stand-alone microcontroller board or as a motor controller peripheral board. |
|
| |
| RELAY-2 |
 |
|
|
Relay peripheral board with 2 power relays. Normally Open and Normally Closed Contacts |
|
| |
| MOTOR-1 |
 |
|
|
Steppermotor driver board that allows complete control and drive for afour-phase unipolar stepper-motor up to 1.25A current per phase |
|
| |
|
 |
|
 |
 |
|
What's Hot?
EZ-APP
applications framework to simplify microcontroller applications development further and allow non-programmers to create applications quickly available now
GadgetPC
powerful, low-cost, 32-bit ARM9 (AT91SAM9260) based microcontroller system with 5 USB ports capable of running Linux available now
OLED Development Kit
Easy project development using Organic LED ( OLED ) displays available now
MINI-MAX/AVR-C
highly expandable micro-controller system which is based on the ATMEL ATMEGA2560-16 single-chip Flash micro-controller available now
|
|
 |