Data-Logger
General purpose data logger kit based on the MINI-MAX/51-C2
Peripheral Boards
Memory
|
MMC-RTC-1Designed for storage/data logger applications. Has a Multi Media Card (MMC/SD) socket and a battery-backed Clock/Calendar. |
|
RAM-1Memory board with 512K static RAM and 512K Flash memory. |
ADC/DAC
|
T-1-1820Digital temperature sensor peripheral board. |
|
TH-1-SHTDigital temperature/humidity sensor board. |
|
TB-1Training Board with LED's, ADC, buzzer, switches, and counter/timer inputs for performing experiments with microcontrollers. |
|
DAQ-2543-DA-1DAQ-2543-DA1 is an ADC/DAC peripheral board with 11 channels of 12-bit analog inputs and one channel of 10-bit analog output. |
|
DAQ-1288-channel, 12-bit analog inputs and 1 channel, 10-bit analog output board. |
|
DAQ-1278-channel, 12-bit analog inputs and 1 channel, 10-bit analog output board. DAQ-127 has +/- 10 Volt input range |
|
THERMOCOUPLE-11 channel thermocouple amplifier with cold-junction compensation. |
|
THERMOCOUPLE-44-channel thermocouple amplifier with cold-junction compensation. |
|
OPTO-99-channel opto-isolated input board. |
|
DAC-810-bit Digital to Analog Converter (DAC) board with 8 analog outputs. |
|
ATB-5CLInterfaces 4-20mA current loop devices to MINI-MAX series boards. |
|
ATB-5PHIConnects Phidgets sensors to MINI-MAX series boards through the analog terminal. |
Display
|
OLED-1128x64 OLED Graphics display board |
|
LCD-1LCD Adapter Board for interfacing to graphical LCD's using serial (SPI) interface |
|
LED-17-segment LED display board for metering applications. |
Comms
|
CB-1Wireless peripheral board. Adds Infrared ( IrDA ), ZigBee or Bluetooth to a host microcontroller. |
|
DM-1High power, long range 900MHz wireless board using DigiMesh XTEND |
|
POD-1POD-1 allows connecting Apple® products such as iPod®, iPhone®, iPad® to MINI-MAX microcontroller boards as well as other microcontroller systems. |
|
UART-2RS232Communications board with two RS232 channels and two (optional) RS485 channels. |
|
X10-1Connects MINI-MAX/51-C to standard X10 devices using the TW523 module. |
|
TW523Two-way X10 power line interface for control and monitoring of X10 devices with microcontrollers. |
|
BRD-RS232-TTL-1RS232 to TTL Converter with XBee ZigBee socket. |
|
DLP-RF2-Z2.4GHz, ZigBee ready, 802.15.4 compliant, Direct-Sequence, Spread-Spectrum, RF transceiver. ** Now Lead Free** 20-pin header provided for connection to user electronics.. |
|
DLP-RFID-LP8CThe DLP-RFID-LP8C is a low-cost, USB-powered, 8-Channel RFID Reader/Writer |
|
DLP-FANTFerrite based, Compact, short range 13.56MHz RFID antenna |
|
DLP-RFID-ANT13.56MHz RFID Antenna with Coax - Configured with a 15-foot coax and reverse polarity SMA connector for use with the DLP-RFID-LP8C |
Control
|
HCD-44-channel high current driver peripheral board. |
|
MOTOR-1BUniversal stepper motor controller board. |
|
DIO-1I/O expander board. Also used as standalone PIC micro-controller board. |
|
RELAY-4REEDRelay peripheral board with 4 reed relays. Normally Open Contacts |
|
RELAY-4Relay peripheral board with 4 power relays |
|
MOTOR-2Controls two stepping motors up to 2.5A. |
|
RELAY-2Relay peripheral board with 2 power relays. Normally Open and Normally Closed Contacts |
|
MOTOR-1Controls a four-phase unipolar stepper motor. |
Other
|
TERMINAL-1Brings out microcontroller ports to terminal blocks. |
|
Standoff kitStandoff kit connects MINI-MAX boards to peripherals or connects two peripheral boards. |
|
PROTO-1Prototyping board with a 20-pin universal expansion connector. |
|
GPS-1Global Positioning System (GPS) Peripheral Board |
|
DLPB-1I/O Expander board adds extra I/O and high current outputs to MINI-MAX/ARM9260-E. |
Robotics
|
BRD-EXP-PLLU3PIExpansion board to connect BiPOM Microcontroller and Peripheral boards to Pololu 3pi robot.This kit includes a 2x7 female header, an extended 2x7 male headers, two extended 2x1 male headers, two 2x1 female headers, four 7/8" nylon spacers, and four screws for the spacers. |
|
BRD-EXP-PLLU3PI-PSExpansion board to connect BiPOM Microcontroller and Peripheral boards to Pololu 3pi robot, 5V on-board power supply.This kit includes a 2x7 female header, an extended 2x7 male headers, two extended 2x1 male headers, two 2x1 female headers, four 7/8" nylon spacers, and four screws for the spacers. |
|
BRD-EXP-PLLU3PI-ZBExpansion board to add Zigbee ( XBee® ) wireless capability to Pololu 3pi robot.This kit includes a 2x7 female header, an extended 2x7 male headers, two extended 2x1 male headers, two 2x1 female headers, four 7/8" nylon spacers, and four screws for the spacers. |
|
3pi Expansion Kit with CutoutsThis kit gives you everything you need to add a second level to your 3pi robot. The red printed circuit board has cutouts that let you view the LCD below and make it easier to reach the power button, reset button, and programming header. |
|
3pi Expansion Kit without CutoutsThis kit gives you everything you need to add a second level to your 3pi robot. In this version, the LCD pins are brought up to the expansion board from the base via extended headers for your own custom use. This red printed circuit board can also serve as a general-purpose round prototyping board. |
